1 3

Keenworth

Table Adhesive Glue Conc.

Table Adhesive Glue Conc.

Table Adhesive Glue Conc. is a concentrated adhesive formula specifically designed to provide superior holding power and secure adhesion. Recommended for screen-printing with extreme accuracy, this formula requires water dilution due to its concentration. Its superior holding power guarantees a strong bond between surfaces & substrates.
View full details

Additional Information

Highlights

  • Concentrated adhesive solution

Application

  • For substrate adhesion during printing.

Material Compatibility

  • Printing tables or surfaces

Screen Mesh

Not Applicable

Instruction

Depending on production quantity and the constant abrasion of removing substrates on the surface, dilute the Table Adhesive Glue with less water for lengthened printing time. Adding 30% water on the adhesive may keep you from refreshing it as often as one would if the adhesive has been diluted with water at 50%.


This adhesive is concentrated in form hence it is mandatory for the Table Adhesive Glue to be diluted with water at a minimum percentage of 30% up to 50%.

  • 30% ~ 50% Water + 50% ~ 70% Table Adhesive Glue

Recommended Curing Parameters

  • Use heat gun to dry layers

Clean Up

Wash materials used with soap and water. Observe all local regulations when disposing of this substance.

Storage & Handling

Store tightly covered at temperatures between 10ºC – 30ºC (50ºF – 86ºF) and a relative humidity between that of 25% to 70%. Keep away from direct sunlight or high temperatures.

Important Note
This technical data sheet does not replace the Safety Data Sheet and should be used according to its recommended purpose. Any person using the product other than that specifically recommended does so at his own risk.

While we endeavor to ensure that all recommendations about our products are correct, many factors may affect the application of the product. It is advised that the quality of the substrate, the condition of the curing method, and other printing characteristics brilliance before mass production.
Disclaimer
The information and recommendation in this publication are to the best of our knowledge, information, and belief accurate at the date of publication. Nothing herein is to be construed as a warranty, express or implied.

In all cases, it is the responsibility of users to determine the applicability of such information or the suitability of any products for their own particular purpose. Therefore, we do not accept any liability whatsoever or howsoever arising for the performance of the product or for any loss or damage incurred out of the use of the product.

The information contained herein is liable to modification from time to time in light of continuous product development or improvements.