Skip to product information
1 of 4

Clog Opener

Clog Opener

Size

Clog Opener is an auxiliary chemical designed to maximize screen printing efficiency by preventing screen mesh clogging. When applied to the mesh prior to printing, it creates a thin coating that helps delay clogs, resulting in smoother, more efficient workflows and fewer interruptions.

Highlight

  • Delays clogging on screen

Application

  • Use directly on screen mesh

Material Compatibility

  • Screen Mesh

Instruction

Spray material evenly onto the screen mesh prior to screen printing

Clean Up

Wash materials used with soap and water. Observe all local regulations when disposing of this substance.

Storage and Handling

Store tightly covered at temperatures between 10ºC – 30ºC (50ºF – 86ºF) and a relative humidity between that of 25% to 70%. Keep away from direct sunlight or high temperatures.

View full details
Important Note
This technical data sheet does not replace the Safety Data Sheet and should be used according to its recommended purpose. Any person using the product other than that specifically recommended does so at his own risk.

While we endeavor to ensure that all recommendations about our products are correct, many factors may affect the application of the product. It is advised that the quality of the substrate, the condition of the curing method, and other printing characteristics brilliance before mass production.
Disclaimer
The information and recommendation in this publication are to the best of our knowledge, information, and belief accurate at the date of publication. Nothing herein is to be construed as a warranty, express or implied.

In all cases, it is the responsibility of users to determine the applicability of such information or the suitability of any products for their own particular purpose. Therefore, we do not accept any liability whatsoever or howsoever arising for the performance of the product or for any loss or damage incurred out of the use of the product.

The information contained herein is liable to modification from time to time in light of continuous product development or improvements.