Skip to product information
1 of 5

Arbitrend Pearl Silver

Arbitrend Pearl Silver

Arbitrend Pearl Silver offers a visually striking print finish, achieving a shade that falls between off-white and light silver, designed to capture attention when applied to dark ground substrates. It serves as a versatile foundation for creating a range of pearlescent colors. This base can be directly printed onto the substrate, eliminating the need for an underbase print.


  • Soft-hand feel with good washing fastness
  • Fashion-base effects with pearlescent silver finish
  • Good washing fastness
  • Good printability and stability on screen
  • Easy cleanup with soap and water


Direct to textile printing. For cut-piece articles and ready-to-wear.

Material Compatibility

  • 100% Cotton
  • 50/50 Cotton-polyester blend/synthetic fiber
  • Calico/Canvas

Screen Mesh

80T-120T, monofilament



  • Use Arbitex clear ready-mixed colors as means of colorant to create various pearlescent colors.
  1. The printing process can be done either manual or via automatic screen-printing.
  2. In halftone print, one [1] stroke is ideal but two [2] strokes are acceptable.
  3. Curing is recommended to greatly increase washing fastness. Curing will also give the print a glossier print output.

Recommended Curing Parameters

  • Drying time : 10 seconds
  • Temperature : 110ºC (230ºF)
  • Equipment : Heat press/oven/flash cure
  • Pre-curing : Heat gun

Time and temperature may vary depending on the curing equipment used.

Clean Up

Wash materials used with soap and water. Observe all local regulations when disposing of this substance.

Storage and Handling

Store tightly covered at temperatures between 10ºC – 30ºC (50ºF – 86ºF) and a relative humidity between that of 25% to 70%. Keep away from direct sunlight or high temperatures.

Label Instruction

View full details
Important Note
This technical data sheet does not replace the Safety Data Sheet and should be used according to its recommended purpose. Any person using the product other than that specifically recommended does so at his own risk.

While we endeavor to ensure that all recommendations about our products are correct, many factors may affect the application of the product. It is advised that the quality of the substrate, the condition of the curing method, and other printing characteristics brilliance before mass production.
The information and recommendation in this publication are to the best of our knowledge, information, and belief accurate at the date of publication. Nothing herein is to be construed as a warranty, express or implied.

In all cases, it is the responsibility of users to determine the applicability of such information or the suitability of any products for their own particular purpose. Therefore, we do not accept any liability whatsoever or howsoever arising for the performance of the product or for any loss or damage incurred out of the use of the product.

The information contained herein is liable to modification from time to time in light of continuous product development or improvements.